6 Inch Twin Wall Structural Locking Band Black

6 Inch Twin Wall Structural Locking Band Black Avis

La note en étoile d'un produit correspond à la moyenne de tous ses avis.


Logo de Gr8 Fires

Vendu par Gr8 Fires

www.gr8fires.co.uk

•

3,8 k Avis

4,6

Les informations sur cette page sont basées uniquement sur les avis produits écrits par des clients de Gr8 Fires via Trustpilot.


Détails du produit

6" Inch Structural Locking Band Black See attached for the BFMCA guidance document which references Document J of the building regs. On page 9 under heading ‘Chimney Heights and Termination’, the text states ‘The maximum freestanding stack height above the roof for a traditional masonry chimney is 5.4 times the narrowest horizontal part of the chimney. In the case of stainless-steel system chimneys, the manufacturer’s installation instructions should be consulted; however in most cases it will be around 1.5 metres. This measurement is taken from the last point where the chimney stack passes the through or past the edge of the roof up to the chimney capping or termination. Tall chimneys may need bracing, always consult the manufacturer for advice’. We recommend a locking band should be fitted to any joint above the height of 1.5m to add sufficient structural support.
  • Marque : VTEC Flue Systems

Tous les avis


Noté 1 sur 5 étoiles

Not sure why I have been asked for a review of an item i ordered, paid for and was told I have a delivery date…..then after it didn’t turn up, was told they in fact didn’t have any stock and would for months.