Uk Anycubic Avis 

I had a problem with my Axe Pro filament feed. Anycubic tech support were so helpful getting to the bottom of the problem, emailing me solutions which were fast and thorough.
Thank you Anycubic.
I would definitely say to prospective buyers looking for a 3D printer, give Anycubic a go, you won't be disappointed.

Having purchased the Kobra 3 with the Ace pro it has been a brilliant machine to use. Quality is far superior to other ones i have used.
Even the warranty feature has been excellant. The support for this has been very quick and helpful even taking into consideration the time zone. From the UK.
I am extremely happy with mine and i am considering buying another one as they are so good.

The ease of access to product support along with the fast response has been very helpful in getting my printer functioning again.
Quick identification of the faulty part and very clear instructions on the replacement procedure all add to a great support experience.

I needed assistance and the support team were perfect, very helpful and clear. Resolved my issue very quickly.

Definitely a happy customer.

My S1 is amazing also.

When my Kobra 3 v2 developed a fault after 6 months, the response was immediate, even on Christmas Day. The support team identified the problem and sent replacement parts together with a link to the fitting instructions. Their post-sales support is superb!

I have moved from another printer brand ( returned my printer) and now exclusively use ANYCUBIC. Not because the printer was bad, but because ANYCUBIC customer service is absolutely world class. I now have 3 printers (2 Kobra 3, and a Kobra s1. Had issues with bed levelling on Kobra 3. A bit of advice and things to try followed by a free strain gauge. This didn’t help so a new print head assembly was sent to me. I can’t sing their praises enough!!!!

I have bought several printers form anycubic and the printers have been great. but what makes anycubic stand out is that when you have an issue, they solve it - I have had a couple of times when a part has broken and they have replaced it. So for me, having this peace of mind means that if I buy from anycubic and there is a problem, i know they will resolve it.

Great support to overcome a problem I had. Replacement part sent promptly free of charge.

Had to raise a Service Ticket with AC for a Kobra S1 Combo and the process was very fast and efficient with parts being advised for despatch within 24 hours.

Upon received the parts were fitted and issue resolved.

The service agent, "Bell" is one of the best I have encountered in any industry and a credit. Generally gets the diagnosis correct 1st time, responds very quickly and processes the parts request near enough immediately.

Fantastic service helping me overcome problems with my refurb purchase. Got an amazing price which has been backed up with exceptional service.

The support and continued help from the support team has been excellent. They hav davised me how to correct the faults and provided detailed visual descroption for me to correct the fault. Could not be better.

Experience has been nothing but negative so far. My order was shipped in two parcels. First parcel with the printer arrived promptly but was left in front of the house on the street for anyone to take. Luckily, my neighbour took it in so it doesn't get stolen. The second parcel arrived and it was an empty, already opened box. After countless emails, customer services are trying to put the responsibility of investigating on me which is against consumer law. They are unwilling to resolve the issue by either replacing the missing part of the order or issuing a refund. I'm considering returning the printer because this just shows anycubic is not helpful to their customers and if this is the start, how will they assist with any other issues or queries going forward.

Super fast responses, helped identify and resolve the issue efficiently. Very polite and helpful

Had a fault on my Kobra 3 Max combo and they resolved the issue in less than 48 hours. OUTSTANDING tech support and customer service.

Excellent service on a fault with anycubic ace pro. They tried to correct the fault online but when that didn't work they arranged for replacement parts.

I have the anycubic kobra s1 and ive not been that impressed. I wish i had gotten a p1s.

The wifi chip they used in it is 2.4ghz single band ONLY. you have to make a dedicated 2.4ghz ONLY wifi and not all routers (especially the router that came from your ISP) support this, dual band is now the norm. Mine has had to be connected to my phone's hotspot from new, nothing else works. Super janky. Why? To save £2.50 per model? Give us a proper wifi chip in your printers please?

Anycubic promised there would be quick swap nozzles. There isnt. Replacing the nozzle is not easy, you have to unplug a plug with a clip on the inside of the print head and its facing the inside of the printer so you have to unclip it without seeing it. Its also the entire nozzle assembly, with heater block and silicon sleeve that gets replaced. The print head cover is also not magnetic, and the cable for it is very very fragile.

There is no chute obstruction sensor. My filament waste chute got clogged 3 times so far. One of those times resulted into a massive print failure, a huge amount of filament built into the poop chute and onto the nozzle, resulting in the print head slamming into the build plate and warping a corner.
The printer then wouldnt print anything on the left side of the plate, nothing woukd stick to the build plate. Had to manually adjust screws inside the hotbed to raise that corner to get it to print again, but it could do with a print bed replacement (which anycubic does not want to provide for free under warranty..)

Anycubic primised there would be a 0.2mm nozzle available shortly after release.
It took them 6+ months to release it, and they released a 0.25mm nozzle, not 0.2. Its also brass only. They also have not tested it properly and the print settings in the anycubic slicer for the 0.25mm do not work well, purging and ejecting poop through the chute doesnt work because the thinner filament stands clump together causing clogs, the nozzle gets clogged constantly, and the print quality isnt much better than with the 0.4mm nozzle anyways.

Talking of print quality: its not good for overhangs. And i cant seem to make it stop making layer shifts randomly. There seems to be issues with the y axis. I have calibrated for flow and pressure advance, i tried with or without flow calibration, no difference, still get layer shifts. Have cleaned and greased z axis and y axis, no difference.

The ACE unit has an issue where, when loading a new filament, instead of loading it correctly, the filament somehow wedges itself through a gap inside the mechanism and unravels itself all over the inside of the unit. You then gotta take it all apart to remove the filament and stuff.

It took 7 months for them to unlock the purging coefficients , before that its was a flat value between 0.5 and 3.0 on the printer itself, and that could only be changed mid print.

They released an update for their slicer at some point, and that update somehow caused the whole software to instantly freeze and not work when launching. The only fix was to somehow find an older version of the slicer and not update it. Despite my emails (that they ignored), it took them a month to fix that.

The ai detection ONLY works if you use the printer in cloud mode, not lan, or usb, and ONLY if you start a print from a desktop computer remotely, not from the printer itself.
The ai detection is also useless. Absolutely useless. It detects nothing when a print fails, but will pause a print in the middle of the night for absolutely no reason.

Anycubic took AGES to release print profiles for their printer and slicer. Had to make my own for ages, and the print profiles are not good. The only high quality profile is for 0.2mm layers. Everything else is just standard fast profile. When you compare that to bambu lab, they have fast, standard and high detail profiles for every single layer size.

The printer is also LOUD. there is a quiet mode but all that does is halve all the speed.

There is also no live chat, no phone lines, no way to contact them. Just an ai bot, and message service or email address. It also takes them a very long time to reply.

Overall the printer works and I have 600 print hours, but I wish I had gotten a bambulab instead.
The printer needs a hot bed replacement ideally, and you need to purchase a fancy internet router to get the stupid thing to connect to the internet. I wish I could return it for a refund.

Anycubic also made lots of promises when the printer was released, none of which they actually delivered. Promised 0.2 nozzle compatibility ? Nope. Noticed user friendly print profiles ? Nope. Promised automatic flow calibration? Flow calibration makes no difference.
Promised the early bird price would be cheaper than rrp as thanks for preordering early? That's was a lie, its mower cheaper than I paid.

Save your money and stick to bambulab people

Very helpful my LCD screen broke a replacement dispatched promptly

Great customer service , great help with any problems , highly recommend any cubic products 5*****

The customer service is brilliant. A very quick response time and extremely helpful. I had a damaged LCD screen and they sent out a replacement with no quibbles. They also provided relevant links.
I would definitely recommend this company